elecmaint / equipment inspection record
Motors Startup Checklist
Engineer name
Date
Work scope & measurement context (optional record fields)
References only. This site supplies no acceptance values, test settings, intervals or release instructions. Selecting a scope does not authorize work. Use Remarks for row-specific context; refer to original files, which are not uploaded here.
Draft · technical review pending. Recording prompts only; not procedures or acceptance criteria. Work and access require your approved plan. No normal ranges, pass/fail values, test settings or maintenance intervals are supplied. Condition results are user-entered judgements under separately approved criteria. Evidence/task/measurement OK means the specified record is complete, not healthy equipment. This checklist does not authorize release to service. Unit selection does not convert values.
Research context & source scope
- USBR FIST technical library — Hydropower maintenance reference library; check edition and installation applicability.
These links do not validate every checkpoint. Technical approval pending; identify the exact applicable manual and work plan.
How to read this form
- As-found observation
- Describe what was observed. OK / Not OK are unavailable.
- Condition
- OK = User assessment under the referenced approved criteria.
- Measurement record
- OK = Required measurement record and context are complete.
- Evidence check
- OK = Required reference or evidence is verified.
- Task record
- OK = The specified recording task is complete.
- Blank / Pending / N/A
- Blank is unclassified. Pending identifies missing checks, evidence or criteria. N/A needs a reason in Remarks.
No row or completed form certifies safety, compliance or fitness for service.
Engineer/date/signature spaces remain for handwriting. Multiple records can be saved locally in this browser and exported; no cloud backup, file attachments or team approval is provided. Older template records stay separate and are not reinterpreted. Keep sensitive information off shared devices.
0 of 50 checkpoints recorded
Compare with an earlier saved inspection
Enter the same Equipment ID, Site and installed-asset identity / serial reference. Only the same template revision is compared. Context and units are shown without conversion or condition verdicts.
Records on hand & preparation
Record the documents and scope available for this inspection. Recording completion is not work authorization.
1
Record equipment identity, subtype, model and installation locationTask record · OK = The specified recording task is complete
2
Reference current drawings, manufacturer manual revision and approved startup scopeTask record · OK = The specified recording task is complete
3
Record installation, shipping/storage and prior repair discrepanciesTask record · OK = The specified recording task is complete
4
Reference approved work controls, responsible personnel and specialist scopeTask record · OK = The specified recording task is complete
5
Record equipment-specific test methods and instrument/calibration referencesTask record · OK = The specified recording task is complete
6
Identify fitted parts, exclusions and separately approved release requirementsTask record · OK = The specified recording task is complete
| No. | Checkpoint | Value / observation | OK | Not OK | N/A | Remarks |
|---|---|---|---|---|---|---|
| 7 | Winding and phase identification match the reviewed nameplate/drawingEvidence check · OK = Required reference or evidence is verified | |||||
| 8 | Accessible winding insulation and lead support condition are documentedEvidence check · OK = Required reference or evidence is verified | |||||
| 9 | Winding thermal or overload event history is recordedEvidence check · OK = Required reference or evidence is verified | |||||
| 10 | Test reports identify tap, winding pair, temperature and instrumentEvidence check · OK = Required reference or evidence is verified | |||||
| 11 | Approved winding-resistance report — attach the approved report with method, conditions and source reference; only if in scopeMeasurement record · OK = Required measurement record and context are complete | |||||
| 12 | Installation/commissioning evidence for windings: drawing/manual revision, as-installed configuration and unresolved punch-list referenceEvidence check · OK = Required reference or evidence is verified |
| No. | Checkpoint | Value / observation | OK | Not OK | N/A | Remarks |
|---|---|---|---|---|---|---|
| 13 | Rotor type, serial identity and inspection access scope are recordedEvidence check · OK = Required reference or evidence is verified | |||||
| 14 | Accessible rotor surface, end ring or winding condition is documented as applicableEvidence check · OK = Required reference or evidence is verified | |||||
| 15 | Balance, vibration and prior repair records are referencedEvidence check · OK = Required reference or evidence is verified | |||||
| 16 | Evidence of rubbing or displaced components is recorded without disassembly instructionsEvidence check · OK = Required reference or evidence is verified | |||||
| 17 | Approved rotor inspection or balance report — attach the approved report with method, conditions and source reference; only if in scopeEvidence check · OK = Required reference or evidence is verified | |||||
| 18 | Installation/commissioning evidence for rotor: drawing/manual revision, as-installed configuration and unresolved punch-list referenceEvidence check · OK = Required reference or evidence is verified |
| No. | Checkpoint | Value / observation | OK | Not OK | N/A | Remarks |
|---|---|---|---|---|---|---|
| 19 | Bearing location and lubrication product/service record are identifiedEvidence check · OK = Required reference or evidence is verified | |||||
| 20 | Accessible seals, leakage and contamination observations are recordedEvidence check · OK = Required reference or evidence is verified | |||||
| 21 | Abnormal sound/vibration observations are recorded under approved conditionsEvidence check · OK = Required reference or evidence is verified | |||||
| 22 | Temperature/vibration results identify speed, load and measurement locationEvidence check · OK = Required reference or evidence is verified | |||||
| 23 | Bearing temperature at the identified location and operating loadMeasurement record · OK = Required measurement record and context are complete | |||||
| 24 | Approved bearing temperature or vibration report; retain units — attach the approved report with method, conditions and source reference; only if in scopeEvidence check · OK = Required reference or evidence is verified | |||||
| 25 | Installation/commissioning evidence for bearings & lubrication: drawing/manual revision, as-installed configuration and unresolved punch-list referenceEvidence check · OK = Required reference or evidence is verified |
| No. | Checkpoint | Value / observation | OK | Not OK | N/A | Remarks |
|---|---|---|---|---|---|---|
| 26 | Coupling type, alignment reference and driven equipment are identifiedEvidence check · OK = Required reference or evidence is verified | |||||
| 27 | Guard, fasteners and visible coupling condition are documentedEvidence check · OK = Required reference or evidence is verified | |||||
| 28 | Alignment report identifies cold/hot condition and methodEvidence check · OK = Required reference or evidence is verified | |||||
| 29 | Foundation, soft-foot and previous coupling service evidence are referencedEvidence check · OK = Required reference or evidence is verified | |||||
| 30 | Approved alignment report; retain measurement method and units — attach the approved report with method, conditions and source reference; only if in scopeEvidence check · OK = Required reference or evidence is verified | |||||
| 31 | Installation/commissioning evidence for shaft & coupling: drawing/manual revision, as-installed configuration and unresolved punch-list referenceEvidence check · OK = Required reference or evidence is verified |
| No. | Checkpoint | Value / observation | OK | Not OK | N/A | Remarks |
|---|---|---|---|---|---|---|
| 32 | Ventilation openings, filters and air paths have documented conditionEvidence check · OK = Required reference or evidence is verified | |||||
| 33 | Fans, guards and cooler/radiator surfaces are inspected within approved accessCondition · OK = User assessment under the referenced approved criteria | |||||
| 34 | Cooling stage control and alarm evidence are referenced where fittedEvidence check · OK = Required reference or evidence is verified | |||||
| 35 | Ambient/load context and sensor location accompany temperature recordsEvidence check · OK = Required reference or evidence is verified | |||||
| 36 | Cooling-system temperature at the identified measurement locationMeasurement record · OK = Required measurement record and context are complete | |||||
| 37 | Cooling-system functional or temperature report — attach the approved report with method, conditions and source reference; only if in scopeMeasurement record · OK = Required measurement record and context are complete | |||||
| 38 | Installation/commissioning evidence for cooling & ventilation: drawing/manual revision, as-installed configuration and unresolved punch-list referenceEvidence check · OK = Required reference or evidence is verified |
| No. | Checkpoint | Value / observation | OK | Not OK | N/A | Remarks |
|---|---|---|---|---|---|---|
| 39 | Protective earth and bonding conductor identification is recordedEvidence check · OK = Required reference or evidence is verified | |||||
| 40 | Accessible bonds, clamps and joints show documented conditionEvidence check · OK = Required reference or evidence is verified | |||||
| 41 | Missing conductors, corrosion and mechanical damage are recordedEvidence check · OK = Required reference or evidence is verified | |||||
| 42 | Reviewed earth drawing and continuity measurement locations are referencedEvidence check · OK = Required reference or evidence is verified | |||||
| 43 | Approved bonding-continuity report — attach the approved report with method, conditions and source reference; only if in scopeMeasurement record · OK = Required measurement record and context are complete | |||||
| 44 | Installation/commissioning evidence for grounding & bonding: drawing/manual revision, as-installed configuration and unresolved punch-list referenceEvidence check · OK = Required reference or evidence is verified |
| No. | Checkpoint | Value / observation | OK | Not OK | N/A | Remarks |
|---|---|---|---|---|---|---|
| 45 | Attach original reports, photographs and manufacturer-document referencesTask record · OK = The specified recording task is complete | |||||
| 46 | Record units, method, conditions and instrument identity for each entered resultTask record · OK = The specified recording task is complete | |||||
| 47 | Explain excluded or inapplicable parts and missing evidenceTask record · OK = The specified recording task is complete | |||||
| 48 | Record discrepancies and assign follow-up owner and due-date referenceTask record · OK = The specified recording task is complete | |||||
| 49 | Record qualified review and separately authorized dispositionTask record · OK = The specified recording task is complete | |||||
| 50 | Reference restoration or release records; this checklist does not authorize releaseTask record · OK = The specified recording task is complete |
Engineer signature
Reviewer / reference
elecmaint.com · Template V6 · 50 checkpoints · No automatic condition assessment. OK does not certify safety or fitness for service. N/A requires an explanation; unknown/unverified items remain unclassified.