elecmaint / equipment inspection record
Substation automation systems Maintenance Checklist
Engineer name
Date
Work scope & measurement context (optional record fields)
References only. This site supplies no acceptance values, test settings, intervals or release instructions. Selecting a scope does not authorize work. Use Remarks for row-specific context; refer to original files, which are not uploaded here.
Draft · technical review pending. Recording prompts only; not procedures or acceptance criteria. Work and access require your approved plan. No normal ranges, pass/fail values, test settings or maintenance intervals are supplied. Condition results are user-entered judgements under separately approved criteria. Evidence/task/measurement OK means the specified record is complete, not healthy equipment. This checklist does not authorize release to service. Unit selection does not convert values.
How to read this form
- As-found observation
- Describe what was observed. OK / Not OK are unavailable.
- Condition
- OK = User assessment under the referenced approved criteria.
- Measurement record
- OK = Required measurement record and context are complete.
- Evidence check
- OK = Required reference or evidence is verified.
- Task record
- OK = The specified recording task is complete.
- Blank / Pending / N/A
- Blank is unclassified. Pending identifies missing checks, evidence or criteria. N/A needs a reason in Remarks.
No row or completed form certifies safety, compliance or fitness for service.
Engineer/date/signature spaces remain for handwriting. Multiple records can be saved locally in this browser and exported; no cloud backup, file attachments or team approval is provided. Older template records stay separate and are not reinterpreted. Keep sensitive information off shared devices.
0 of 48 checkpoints recorded
Compare with an earlier saved inspection
Enter the same Equipment ID, Site and installed-asset identity / serial reference. Only the same template revision is compared. Context and units are shown without conversion or condition verdicts.
Records on hand & preparation
Record the documents and scope available for this inspection. Recording completion is not work authorization.
1
Record equipment identity, subtype, model and maintenance scopeTask record · OK = The specified recording task is complete
2
Review previous inspection, repair and original test recordsTask record · OK = The specified recording task is complete
3
Record operating events, known defects and outstanding follow-upTask record · OK = The specified recording task is complete
4
Reference current manufacturer maintenance instructions and approved work controlsTask record · OK = The specified recording task is complete
5
Record approved methods and instrument/calibration references for planned testsTask record · OK = The specified recording task is complete
6
Identify fitted parts, maintenance exclusions and baseline comparison conditionsTask record · OK = The specified recording task is complete
| No. | Checkpoint | Value / observation | OK | Not OK | N/A | Remarks |
|---|---|---|---|---|---|---|
| 7 | PLC/controller, firmware and approved program revision are recordedEvidence check · OK = Required reference or evidence is verified | |||||
| 8 | Program backup, checksum and change authorization are retainedCondition · OK = User assessment under the referenced approved criteria | |||||
| 9 | Power supply, IO terminal and diagnostic condition are documentedEvidence check · OK = Required reference or evidence is verified | |||||
| 10 | Functional/IO verification reports identify tested cause-and-effect pathsEvidence check · OK = Required reference or evidence is verified | |||||
| 11 | Approved control logic/I/O verification report — attach the approved report with method, conditions and source reference; only if in scopeEvidence check · OK = Required reference or evidence is verified | |||||
| 12 | Maintenance follow-up for control logic & i/o: change from baseline, service/replacement performed and unresolved defect referenceEvidence check · OK = Required reference or evidence is verified |
| No. | Checkpoint | Value / observation | OK | Not OK | N/A | Remarks |
|---|---|---|---|---|---|---|
| 13 | Network device, port, protocol and firmware identity are recordedEvidence check · OK = Required reference or evidence is verified | |||||
| 14 | Cable/connectors, link state and accessible enclosure condition are documentedEvidence check · OK = Required reference or evidence is verified | |||||
| 15 | Approved network configuration and backup are referencedEvidence check · OK = Required reference or evidence is verified | |||||
| 16 | Communication/end-to-end reports identify path and outage/latency observationsEvidence check · OK = Required reference or evidence is verified | |||||
| 17 | Approved communication or end-to-end verification report — attach the approved report with method, conditions and source reference; only if in scopeEvidence check · OK = Required reference or evidence is verified | |||||
| 18 | Maintenance follow-up for communications: change from baseline, service/replacement performed and unresolved defect referenceEvidence check · OK = Required reference or evidence is verified |
| No. | Checkpoint | Value / observation | OK | Not OK | N/A | Remarks |
|---|---|---|---|---|---|---|
| 19 | Clock/time source, protocol and timezone configuration are recordedEvidence check · OK = Required reference or evidence is verified | |||||
| 20 | Synchronization/holdover status and loss-of-source alarms are documentedEvidence check · OK = Required reference or evidence is verified | |||||
| 21 | Antenna, cabling and reference source service records are retainedEvidence check · OK = Required reference or evidence is verified | |||||
| 22 | Timestamp correlation report identifies reference and affected devicesEvidence check · OK = Required reference or evidence is verified | |||||
| 23 | Approved time synchronization report — attach the approved report with method, conditions and source reference; only if in scopeEvidence check · OK = Required reference or evidence is verified | |||||
| 24 | Maintenance follow-up for time synchronization: change from baseline, service/replacement performed and unresolved defect referenceEvidence check · OK = Required reference or evidence is verified |
| No. | Checkpoint | Value / observation | OK | Not OK | N/A | Remarks |
|---|---|---|---|---|---|---|
| 25 | DC circuit identity, nominal rating and polarity labels are recordedEvidence check · OK = Required reference or evidence is verified | |||||
| 26 | Accessible connections, protection and earth fault indications are documentedEvidence check · OK = Required reference or evidence is verified | |||||
| 27 | Load and backup source operating records are referencedEvidence check · OK = Required reference or evidence is verified | |||||
| 28 | DC voltage reports identify measurement point and operating conditionEvidence check · OK = Required reference or evidence is verified | |||||
| 29 | Approved DC voltage report — attach the approved report with method, conditions and source reference; only if in scopeMeasurement record · OK = Required measurement record and context are complete | |||||
| 30 | Maintenance follow-up for dc circuits: change from baseline, service/replacement performed and unresolved defect referenceEvidence check · OK = Required reference or evidence is verified |
| No. | Checkpoint | Value / observation | OK | Not OK | N/A | Remarks |
|---|---|---|---|---|---|---|
| 31 | Approved logic diagram and settings revisions are recordedEvidence check · OK = Required reference or evidence is verified | |||||
| 32 | Permissive, trip and alarm test evidence references the tested pathsEvidence check · OK = Required reference or evidence is verified | |||||
| 33 | Temporary overrides and disabled logic are documentedEvidence check · OK = Required reference or evidence is verified | |||||
| 34 | Change authorization and as-left configuration evidence are retainedEvidence check · OK = Required reference or evidence is verified | |||||
| 35 | Approved logic/setting verification report — attach the approved report with method, conditions and source reference; only if in scopeEvidence check · OK = Required reference or evidence is verified | |||||
| 36 | Maintenance follow-up for logic & settings: change from baseline, service/replacement performed and unresolved defect referenceEvidence check · OK = Required reference or evidence is verified |
| No. | Checkpoint | Value / observation | OK | Not OK | N/A | Remarks |
|---|---|---|---|---|---|---|
| 37 | Sensor model, location, measured quantity and calibration status are recordedEvidence check · OK = Required reference or evidence is verified | |||||
| 38 | Accessible mounting, wiring and environmental condition are documentedEvidence check · OK = Required reference or evidence is verified | |||||
| 39 | Scaling and approved controller configuration references are retainedEvidence check · OK = Required reference or evidence is verified | |||||
| 40 | Sensor verification reports identify reference, method and installed contextEvidence check · OK = Required reference or evidence is verified | |||||
| 41 | Approved sensor verification report; retain quantity and units — attach the approved report with method, conditions and source reference; only if in scopeEvidence check · OK = Required reference or evidence is verified | |||||
| 42 | Maintenance follow-up for sensors & monitoring: change from baseline, service/replacement performed and unresolved defect referenceEvidence check · OK = Required reference or evidence is verified |
| No. | Checkpoint | Value / observation | OK | Not OK | N/A | Remarks |
|---|---|---|---|---|---|---|
| 43 | Attach original reports, photographs and manufacturer-document referencesTask record · OK = The specified recording task is complete | |||||
| 44 | Record units, method, conditions and instrument identity for each entered resultTask record · OK = The specified recording task is complete | |||||
| 45 | Explain excluded or inapplicable parts and missing evidenceTask record · OK = The specified recording task is complete | |||||
| 46 | Record discrepancies and assign follow-up owner and due-date referenceTask record · OK = The specified recording task is complete | |||||
| 47 | Record qualified review and separately authorized dispositionTask record · OK = The specified recording task is complete | |||||
| 48 | Reference restoration or release records; this checklist does not authorize releaseTask record · OK = The specified recording task is complete |
Engineer signature
Reviewer / reference
elecmaint.com · Template V6 · 48 checkpoints · No automatic condition assessment. OK does not certify safety or fitness for service. N/A requires an explanation; unknown/unverified items remain unclassified.